 LED
AQUA (outdoor)
|
LED Aqua is a high power water submersible led lighting fixture, which is an ideal fixture for both indoor and outdoor applications requiring full color mixing capabilities, such as fountain, pool, theme park, exhibition, commercial and architectural illuminations. For best heat dissipation, the LED AQUA is recommended to be used underwater. |
Aqua has a protection rating exceeding IP68, which is suitable for submersion up to 2 meters underwater. A proprietary triple water proofing technology is used, making water intrusion impossible.
The beam angle of aqua is 25°. The fixture can be controlled by any DMX controller.
Each unit is individually addressable and requires 3 DMX channels corresponding to red, green, and blue respectively. Full color mixing is achieved by varying intensity of each primary color. Up to 16.7 million colors can be produced.
Aqua uses the highest quality and high brightness LEDs as light source with typical LED life up to 100,000 hours. Each unit is consisted of 360 LEDs (120 red, 120 green, 120 blue). The aqua circuitry is engineered to optimize both LED life and performance.
|
|
|
A proprietary power and data distribution system is used to minimize wiring. The whole system includes a DMX controller, a switching power supply, a submersible junction box, and Aqua fixtures. The junction box dramatically reduces cable runs and provides power and data distribution.
Aqua has a stainless steel / cast aluminum housing with adjustable yoke and base. The housing is designed to work in water treated with bromine and chlorine.
Aqua is available in three versions for different customer's budget:
a. DELUXE PROFESSIONAL - stainless steel casting / ultra bright LED.
b. PROFESSION - aluminum casting / ultra bright LED.
c. CONVENTIONAL - aluminum casing / super bright LED.
|
|
|
|
• Assembling of the junction box |
• Wiring of the power supply case |
• LA-DIA220-12V-PI |
|
 Technique Specifications :
Color Range: |
16.7 million colors at 24 bit RGB additive color mixing |
Light Source: |
360 high-powered light emitting diodes |
Beam Angle: |
25 °C |
Signal transferring format: |
standard DMX protocol (RS485 terminal) |
Control system: |
DMX console + power switch + distributor or SRC-AI-100 Address Writer + power switch + distributor.
|
DMX address: |
Generated by Neo-Neon SRC-AI-100 Address Writer. |
Housing: |
stainless steel |
Connector: |
3-pin signal connector |
Size: |
L255*W180*H245.4 |
|
Electrical Specifications :
Operating Voltage:. |
12V DC |
Power consumption: |
25W |
|
Environmental Specifications :
Operating Temperature: |
-20°C - 55°C |
Protection Rating: |
IP68 |
Submersion Depth: |
400mm ?C 2000mm |
Sustainable Pressure: |
0.0533T/mm2 |
|
Color Effects :
| Fixed Color: |
single static color display |
| Color Wash: |
color change |
| Cross Change: |
two color cycles |
| Random Chang: |
colors change in random order |
| Fixed Color Strobe: |
a rapid strong flash of light of a single color |
| Variable Color Strobe: |
a sequence of color appears in a series of strong flashes of light |
|
