| -
SDL-109A-T1
|
• SDL-109A-1 signal amplifier is designed to amplify the control signal generated from a controller to achieve various lighting effects for the LED lighting system. It consists of a transformer and a signal amplifying board. The amplifier which is plugged into the signal transmission cable improves the signal which deteriorates or is distorted during the transmission. With the help of the amplifier, a large number of LED tubes can be linked in series without compromising the lighting effects.
|
|
• Specifications :
| Input Voltage: |
AC 240V 50Hz / AC 120V 60Hz |
| Note: |
an appropriate transformer is needed. |
| Signal Input Connector: |
5-pin male connector |
| Signal Output Connector: |
5-pin female connector(Converting connecter to connect to 3-pin or 4-pin connector) |
| Protection Rating: |
IP65 |
| Housing: |
ABS UL94-V1 |
| Size: |
144*104*65mm |
| Weight: |
1.25kg (including the transformer) |
|
• Installation of the Unit
| Data Connection: |
DMX512 |
| Controller: |
M/S or DMX512 controller |
| DMX Signal Input: |
3-pin male connector |
|
• Caution :
Avoid big impact on the unit
The product is waterproof, but not suitable for under water.
Avoid high temperature which could damage the electronic components in the PCB.
Operating temperature: -20??C~+45??C |
|
